Skip to main content
Flush Floors Premium Flooring, Flawlessly Fitted
07738 437214 Request a quote
Commercial · LVT

Commercial LVT Flooring Installation

Amtico, Karndean and Polyflor LVT in commercial-grade builds — surveyed, prepped, laid-and-patterned by accredited installers for offices, retail and hospitality.

Amtico LVT in a modern office reception with a planked laying pattern

Brands we fit for this service

  • Amtico
  • Karndean
  • Polyflor
What we do

What is lvt in a commercial setting?

Luxury vinyl tile (LVT) is PVC-based, waterproof throughout, and — with the embossing and print quality of a premium range — visually close to the material it imitates. For commercial use it's one of the most versatile and hard-wearing floors we fit.

Typical applications

Where we fit lvt commercially.

Process

From enquiry to handover.

Six steps, no surprises. We quote to win the right job — not the one we can skim corners on.

  1. 01

    Site survey and moisture test

    LVT failures almost always start with a damp, uneven, or contaminated subfloor. We hygrometer-test, check levelness to the manufacturer's tolerance, and survey existing adhesive residues.

  2. 02

    Design input

    For patterned installations we work with the designer on a setting-out drawing, balance the pattern to the space, and agree border and threshold details.

  3. 03

    Priced proposal

    Fully itemised — product, adhesive, subfloor prep (DPM, latex, ply), patterning labour, trims, welding (where specified), uplift and programme.

  4. 04

    Subfloor preparation

    Self-levelling, moisture suppressant where required, ply overlay for timber subfloors. We work to the adhesive manufacturer's spec, not general practice.

  5. 05

    Installation

    Boxes batched and acclimatised, adhesive applied correctly for conditions, tiles or planks laid to the setting-out drawing, rolled and edge-trimmed cleanly.

  6. 06

    Handover and maintenance regime

    First-clean, care instructions, spare stock, and O&M pack including fire certs, wear warranty, slip data and batch numbers.

Short form

Quick quote for lvt

Give us the basics and we'll be in touch within one working day to arrange a measure.

FAQs

Commercial lvt — your questions.

What wear layer do we need for a commercial install?

0.55mm is the entry-level commercial spec; 0.70mm is the reliable answer for most office and retail environments; heavy-traffic public spaces and hotel receptions benefit from 1.0mm. We'll match to the footfall and warranty you need.

Can you lay patterned LVT — herringbone, parquet, inlays?

Yes. We produce a setting-out drawing, balance the pattern to the room, and lay in batched quantities so the natural tile variation is spread evenly. Borders and inlays are normal work for us.

How do you handle live-trading retail spaces?

Phased, overnight, or weekend — agreed up front. We barrier the work, use low-odour adhesives, and hand the space back ready for trade each morning.

Do you supply fire and slip data?

Yes. O&M packs include Cfl-s1 (or higher) fire classification, PTV slip test data, product EPD where requested, and full maintenance regime.

How quickly can the space be back in use?

Most commercial adhesives allow foot traffic within 24 hours and full wheeled load within 48–72. For faster turnaround we can specify a rapid-set system at a small premium.

Welded or unwelded seams?

Most commercial LVT is unwelded — joints are tight enough that welding isn't needed. For healthcare or wet-area installs where a continuous hygienic finish is required, we chemically or heat-weld the seams.

Related

Other commercial services.

Where we fit

Commercial lvt across the region.

Based in Hertfordshire, covering Watford, St Albans, Hemel Hempstead, Luton, Milton Keynes, Aylesbury, North London and across the commuter belt in between.

Ready when you are

Request a no-obligation quote.

We measure, advise, and write a clear quote — no fee, no pressure. Reach us on 07738 437214 or via the enquiry form.